Haomei Color-coated aluminium sheet/coil ,Our production technology is four coating and two baking
the surface of products is Smooth and flat,
the color is uniform,Weather resistance
Anti-corrosion,Anti-ultraviolet ;which is better to resist UV in the air and corrosion.
Haomei Color-coated aluminium sheet/coil adopt high quality aluminum plain coil and use best imported paint, the composition contains 70% PVDF.
PVDF Color-coated aluminium sheet/coil
fluorocarbon lacquer coating(PVDF coating) owes the best acid/alkali resistant and temperature tolerance capabilities of all painting materials. Being the best quality of precoated aluminum, PVDF coated coils are especially suitable for outdoor roofing/walls and hang ceilings manufacturing. Using high-grade polyester lacquer coating material, the finished coating coils are with delicate color uniform texture, color and diverse. It is the most popular and most common used materials in decorative usage. The PE coated aluminum are widely used in ACP(aluminum composite panel)
production and indoor ceiling usage.
Grade:1000 Series: 1050 1060 1100;3000 Series: 3003 3004 3105;5000 Series: 5052 5605,5083;6000 Series: 6061 6063;8000 Series: 8011 8021 8079
Thickness:0.20-8.00mm
Width:2400mm max
Grade:1000,3000,5000,6000,8000series
Coil ID:75mm, 150mm, 200mm, 300mm, 400mm, 508mm or negotiable
Coil weight:1000-5000kgs
Coil OD:1700mm max.
Temper:O, H12, H14, H16, H111, H22 ,H24, H26, H28,T4, T6,etc.
Temper:
F processing state
H strain hardening state
O annealing
T heat treatment state
H112 pure state of strain hardening, adjustment has been made to degree of strain hardening and annealing
T4 solid solution treatment and natural efficiency to achieve sufficient stability condition
T5 artificial aging condition of the reentry after high temperature thermal cooling
T6 artificial aging state after solid solution treatment
Haomei Aluminium alloy wallboard standard:
Aluminum alloy sheet: Base on AA1100,AA3003,AA3004, AA3104, AA3105,AA5052,AA5754, 1.0-4.0mm thick aluminum alloy panels, according to the standard of our country’s provision
The thickness of the coating: 30μ
Film thickness: Adopt PVC film, standard thickness is 80μ
Color requirement: Could according to the color board or color number of the client’s offer.
Gloss requirement: Could do if from 20% to 60% according to the gloss request of the client.
Processing method: According to the mechanical aptitude of aluminum alloy panels, adopt the special bending of radius, finished except
welding technology.
Frontispiece painting: Adopt KYNAR 500 fluorocarbon resin paint (more than 70% fluorocarbon resin)
Frontispiece guarantee: Coating guarantee for 20 years.
The specification of the wall board: width 1700mm, length 6000mm
PCM: It is a code word of the printing pre-coating method( roll coating) no color difference technique.
Painting method: Adopt the most advanced PCM printing, 2 coating and 2 baking, no color difference, extreme flatness technique method.